Concentric casing drilling uses a center bit and reaming sleeve to open the hole to the casing OD, so the casing follows the bit through boulders, karst and backfill.
Center (pilot) bit, reaming sleeve / reaming ring, casing shoe, casing, drill pipe and DTH hammer or drifter – supplied as one matched set for the casing size and hammer you use.
| Series (R / P) | Casing OD (mm) | Casing ID (mm) | Center Bit Max OD (mm) | Reamed Hole (mm) | Max Bit Pass (mm) | Matched Hammer / Drifter |
|---|---|---|---|---|---|---|
| R76 / P76 | 76 | 62 | 57 | 84 | 39 | R32 drifter |
| R89 / P89 | 89 | 73 | 73 | 96 / 100 | 58 | T38 drifter |
| R114 / P114 | 114 | 94 | 92 | 122 / 126 | 80 / 84 | COP34 / DHD3.5 / TH3.5 |
| R127 / P127 | 127 | 107 | 105 | 136 / 142 | 90 / 93 | COP34 / DHD3.5 / TH3.5 |
| R140 / P140 | 140 | 120 | 116 | 150* / 160* | 97 | COP44 / DHD340 / SD4 / QL40 |
| R146 / P146 | 146 | 126 | 124 | 160* / 166* | 110 | COP44 / DHD340 / SD4 / QL40 |
| R168 / P168 | 168 | 142.6 | 141 | 188 | 125 / 127 | COP54 / DHD350 / SD5 / QL50 / M50 |
| R178 / P178 | 178 | 152.6 | 150 | 186* / 196* | 135 / 131 | COP54 / DHD350 / SD5 / QL50 / M50 |
| R194 / P194 | 194 | 168.6 | 166 | 202 / 214 | 145 | COP64 / DHD360 / SD6 / QL60 / M60 |
| R219 / P219 | 219 | 193.6 | 192 | 228 / 243 | 170 | COP64 / DHD360 / SD6 / QL60 / M60 |
| R245 / P245 | 245 | 219.6 | 214 | 260* / 268 | 195 | COP84 / DHD380 / SD8 / QL80 |
| R254 / P254 | 254 | 228.6 | 224 | 265 / 276 | 203 | COP84 / DHD380 / SD8 / QL80 |
| R273 / P273 | 273 | 247.6 | 241 | 286 / 305 | 223 | COP84 / DHD380 / SD8 / QL80 |
| R325 / P325 | 325 | 299.6 | 292 | 338 / 350 | 276 | COP84 / DHD380 / SD8 / QL80 |
| R406 / P406 | 406 | 380.6 | 377 | 420 / 442 | 350 | DHD112 / TH12 / QL120 / SD12 / NUMA120 |
| R508 / P508 | 508 | 482.6 | 478 | 522 / 545 | 416 | QL200 / SD18 / NUMA180 / TH18 |
| R560 / P560 | 560 | 534.6 | 528 | 575 / 595 | 475 | QL200 / SD18 / NUMA180 / TH18 |
| R610 / P610 | 610 | 584.6 | 558 | 620 / 645 | 513 | QL200 / SD18 / NUMA180 / TH18 |
| Type | Operation | Difficulty | Strength | Typical Casing Depth | Best For |
|---|---|---|---|---|---|
| Rotary-wing eccentric bit | Forward rotation opens the wing; reverse rotation retracts it (not less than 90 degrees) | Medium | Medium | Up to 50 m | General overburden, water well and foundation holes |
| Single swing-block eccentric sleeve | Forward-reverse within one turn, clean the hole, repeat | Medium | Medium | About 30 m | Shallow casing, small diameter |
| Three-wing concentric bit | No casing step; pressure plate required at the rotary head | Low | Low | About 30 m | Simple shallow casing |
| Concentric system | Center bit + reaming ring; one reaming ring is consumed per hole | Medium | High | 100 m+ | Boulders, karst, backfill, deep casing, piling |
| Slider-type concentric tool | Sliding-block reaming and retracting structure | High | High | Large-diameter work | Large-diameter casing and difficult ground |
| Casing Type | Connection | Casing Shoe | Notes |
|---|---|---|---|
| Steel casing | Left-hand fine thread / corrugated thread / welded | Threaded or welded shoe | Regular or high-quality steel casing |
| PVC casing | Threaded | Threaded shoe | Galvanized or black iron pipe option |
| Recommended drill pipe | API 2 3/8 inch REG / IF (NC26, NC31, NC38, NC50) and larger | – | Stabilizer thread matches the drill pipe thread |
R = recoverable, P = non-recoverable; values with * are confirmed against the catalog before shipment. Sizes 660-1550 mm are non-recoverable and made to order. Send the casing OD, wall thickness and hammer model and we match the center bit, reaming sleeve and shoe.